International Journal of Scientific Engineering and Research (IJSER)
Call for Papers | Fully Refereed | Open Access | Double Blind Peer Reviewed | ISSN: 2347-3878


Downloads: 0

India | Mechanical Engineering | Volume 4 Issue 5, May 2016 | Pages: 65 - 69


To Analyze the Performance of Solar Parabolic Trough Concentrator with Two Different Reflector Materials

Syed Mohd. Yasir Arsalan, Earnest Vinay Prakash, Dr. Ajeet Kumar Rai

Abstract: In the present work, an attempt has been made to design, fabricate, evaluate and compare the performance of two different PTCs, to produce hot water, by using two different reflector materials. In PTC-1, reflector material is made by acrylic mirror sheet, and in PTC-2 reflector material is made of by stainless steel sheet. For both the PTCs the rest of the materials used are same. The supporting stand is made up of cast iron, the receiver material for both the PTC is G.I. pipes, and rim angle for both the concentrator is 900. The aperture area of both the concentrators is 2.131 m2. And concentration ratio of both the concentrators are 10.91. The maximum instantaneous thermal efficiency obtained by the concentrator having acrylic mirror sheet is 13.67 %, and concentrator having stainless steel material is 15.85 %.

Keywords: Solar Parabolic Trough Collector (PTC), Reflector, Receiver, Maximum Temperature, Thermal Efficiency



Citation copied to Clipboard!

Rate this Article

5

Characters: 0

Received Comments

No approved comments available.

Rating submitted successfully!


Top